Rena
UV-C Sterilizer : For cups and drinking water
UV-C Sterilizer : For cups and drinking water
Rena means ‘to purify’ or ‘to make clean’ in Swedish. It contains the meaning of ‘purifying clean’ our cups and beverages. Rena is an ultraviolet sterilizer for cups and drinking water using three UV-C10mW 275nm LEDs.
millimeter studio proceeded with the turn key from planning, naming, branding, product design, mechanism design, hardware design, firmware design, photography, manual design, package design, mass production and mold management.
The use of thermos and reusable containers is increasing due to regulations on single-use products and the avoidance of plastic use.
However, a thermos with a narrow entrance is difficult to clean and difficult to clean.
Bacteria multiply inside the cups or thermos that are not dried and are detected three times more than the bungee cover.
Bacteria multiply inside the cups or thermos that are not dried and are detected three times more than the bungee cover.
Therefore, a personal cup sterilizer in the form of a cup cover was produced using UV-C LED, and the part where the cup and the product contact was finished with removable silicone and designed to be washable with water.
Rena can easily sterilize cups and beverages with a simple method of 'put on a tumbler or cup and press the button'.
• Rena provides 99.9% sterilization of cups (tumblers, mugs, baby bottles etc.) and drinking water.
•The device has a built-in battery for portable use.
• Power is not turned on when the device is tilted or flipped.
• If the device tilts more than 20 degrees during operation, the power is automatically turned off.
• The silicone parts that touch the cup and product are designed to be detachable and cleaned.
•The device has a built-in battery for portable use.
• Power is not turned on when the device is tilted or flipped.
• If the device tilts more than 20 degrees during operation, the power is automatically turned off.
• The silicone parts that touch the cup and product are designed to be detachable and cleaned.
• Put the device on top of the cup and push the button.
• When sterilization begins, power indicator lights up.
- Rapid sterilization: power indicator blinks at short intervals
- Complete sterilization: power indicator blinks at long intervals
- Complete sterilization: power indicator blinks at long intervals
• Power indicator light goes off when sterilization ends.
When placed on the charging cradle, it is automatically attached and charged by a magnet.
millimeter studio
millimeter studio is a product design studio based in Seoul, Korea.
We believe in better design completes with efforts for details.
We rather follow logic persistently to materialize and help your goal.
We believe in better design completes with efforts for details.
We rather follow logic persistently to materialize and help your goal.
jiyongkim@millimeterstudio.co.kr
www.millimeterstudio.co.kr
©2020
