bend lamination rocking toy
This is a project in wood I class. Ojective is to use bend lamination techinque to create a toy. This is my design of a rocking chicken.
This a project in Metal I class. I used 1/8'' aluminum sheet to construct a cube that is only flexible in a certain direction.The structure lock in position by using the thickness of the material. Each piece of the metal are fit in exactly with one another and the error has to be less than 1/8'' for it to work.
This is a project from Metal I class in first semester of RISD industrial design. I made a flexible structure using brass wire and Tin plate.
This is a project in design principle class. I attempt to construct a walking mouse trap powered cart using foam leg. although it didn't actually walk because the power of the spring is hard to control, the mechanism work smoothly.
This is a project in design principle class in first semester of risd industrial design. The ojective is to make a work alike model to demostrate how a certain mechanism works. I was assign how toaster pop bread and I used wood, rubber band and magnant to construct it. I figured out it is spring that pull up the bread and electro-magnit that hold it down. I used rubber band and regular megnant to represent them.
This is a project in Wood I class in first semester of risd industrial design. It is a carving practice and I made a organic shape poplar tray. the back side are painted with milk paint and have a organic pattern.
This is a project in Wood I class. it is a hand tool practice of making perfect walnut disk.
This is a project in Wood I class. It is a Lathe machine practice.
Machine practice, form study
18'' x 8'' cherry cutting board
machine used: planer, jointer, table saw, disk sander.
machine used: planer, jointer, table saw, disk sander.
Cherry plate/bowel
machine used: lathe.
machine used: lathe.
