The fault and corresponding solution during the use of woodworking CNC Router
We all know that the use of cnc machine for a long time will inevitably show some small faults. Some reasons are because of the failure of the machine's own equipment. Some reasons are because of the mistakes of the job staff. The
The processing process of the woodworking carving machine is stopped or slowed down.
Cause:
1. Unstable operation voltage or overload, just add a regulator.
2. Can reflect whether the middle line can be connected?
The carving machine cannot be carved at the original point.
Cause:
1. Whether the layout of the file can match the mechanical.
2. Whether the reflection can be set with offset (offset), and the layout settings may be accurate.
When the woodworking carving machine launchs a reset, it is announced that the pervert is static or always the limited limit switch.
Cause:
1. The limit switch is not available.
2. The driving line is not good, and the driver line is strong.
3. The limit switch line is not connected, just connect the line.
4. The limit switch is damaged and can be replaced.
The woodworking sculptor is occasionally shifted forward or shifted to the right when the original point is set, and the offset distance is uncertain.
Cause:
1. Limit switch failure, the limit switch is closed and bounced when the system returns to the original point of the system. Just replace the limit switch.
2. The driver line is loose. Try the idea to solid it tightly.
If you use our carpenter -engraving opportunities, you can communicate with us online. We are glad to communicate with you and help you.
