Xbox 360 s Wall mounting bracket

Xbox 360 s SPECS

Dimensions = 27cm H x 26cm W x 7cm D

Weight = 2.9 kg (brackets need to support 10 pounds aprox 4.5 kg)

Improved cooling over earlier models - "CPU and GPU were both fabricated on a 45 nm process and could be combined on the same die. And the graphics memory, while still implemented on a standard die, was included under the same package lid as the CPU/GPU combo, which greatly simplified the system’s heat sink and fan architecture."

ventilation located on the top and sides of the console. Orientation in bracket would have to allow for easy air flow so the GPU and CPU don't overheat and heat can be extracted from the heatsink. Under natural cooling the convection occurring within the heatsink would cause the heat to rise, but due there being a fan this forces it out of the vent on the side so vertical orientation doesn't affect cooling.

Fan and heatsink located above mother board, GPU and CPU.

Xbox 360 controller specs:

Bracket research -

Examples of standard wall brackets for shelving etc:

Example one - Mounted points are located above or below the object that is being held. Two points of contact with the anchor (and assuming two points of contact with the object). 

Example two - Mounted points are located both about and below the object being held. Three points of contact with the anchor and two on the object. Supporting arm from lower bracket to arm supporting object.

Example three - Two separate pieces with two mounting points above and below object. Two points of contact with anchor none of the object. 

Products already in the market:

Floating grip Xbox 360 wall mount 

Save space by mounting your XBOX 360 on the wall. This Wall Mount compatible with the XBOX 360, uses a rope-hanging system that keeps the console safe and stable on the wall. Display the console next to your tv or right next to it for a cool look.

this XBOX 360-compatible mount provides access to all of the ports of the console and buttons. It also leaves a gap between the device and the wall for 360-degree ventilation.

These XBOX 360 Wall Mount system come ready to install. All you need is a drill and a screwdriver. All the anchors, wall plugs, and screws are already included in the package.

HIDEit Uni-MW | Adjustable Xbox 360 + Xbox One + Xbox One Slim Wall Mount

Xbox One Wall Mount for Xbox 360 + Xbox One + Xbox One S

•  Adjustable to fit every Xbox console (360 - One S).
•  Easy access to buttons and ports.
•  Powder coat finish protects components from scratches.
•  Made in the USA from 16-gauge, cold-rolled steel for durability.
•  Quick and easy to install. Minimal tools needed.
•  Includes drywall screws and drywall anchors. Stud mounting optional.

Modelling:

Modelling of controller bracket: